Flame & Fire Test
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →
Flame & Fire Test
This equipment is used in conjunction with the high-temperature oven, specimens are hung in the device and placed in an oven, and put the weights on the lower grip of specimens, after 10 minutes, measure the distance between the marks and calculate the elongation.
View More →
Other Testing Equipment
CM52160 Fluorine Content Measuring Instrument
The instrument is a perfect combination of advanced electronic technology, sensor technology, and software design, and is the most cost-effective laboratory fluoride concentration analysis instrument. It is widely used for the testing and analysis of fluoride in drinking water, surface water, seawater, domestic sewage, and industrial wastewater, as well as the determination of fluoride in mineral materials, organic materials, and biological materials.This instrument is built-in microprocessor chips, nice appearance, user-friendly with the following outstanding features.
View More →
Other Testing Equipment
CM52161 Halogen Acid Gas Release Determination Device
This equipment is used to measure gas volume of Halogen Acid (IEC 60754-1), pH concentration (PH Meter, Hydrogen ions, IEC 60754-2), Conductivity (IEC 60754-2) and etc from a wire (cable) by radiant heat in the Tube Furnace (IEC 60754-1: 800℃, IEC 60754-2: 950℃)
View More →
Other Testing Equipment
CM52032 Carbon Black Content Test Device
This equipment is designed and produced in line with GB/T2951.41—2008 <Common test methods for insulating and sheathing materials of electric and optical cables--Part 41: Methods specific to polyethylene and polypropylene compounds - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion>, used for determination of carbon black content of polyethylene, polypropylene, polybutylene plastics.
View More →
Mechanical Property Test
CM-ES-E210B Analytical Balance
Rear mounted electromagnetic force sensor, spacious weighing chamber; external weight calibration; Large LCD white background display screen; Multiple measurement units and counting weighing methods, unit conversion and data output; Equipped with overload/underload alarm; Full range peeling, accumulation/subtraction, bottom hook weighing, and other functions.
View More →
Flame & Fire Test
CM41016B Ventilation Aging Test Oven
This equipment is applicable for wires, leathers, plastics, rubbers, textiles changing properties before and after being heated. For the wires, it is used to maintain the fresh air inside the chamber and a special regulation of ventilation when being heated. With a precision designed ventilation regulating device, a digital wattmeter and timer enable to measure the ventilation rate. Horizontal forced air circulation system and internal airflow adjustment on both sides, make sure the internal temperature of the testing machine uniformity and stability.
View More →
Mechanical Property Test
CM31118 Intelligent Cable Profile Projector
Intelligent projectors are measuring instruments controlled by intelligent chips, which utilize microcomputer principles and a projector to directly display the measurement values of insulation thickness and outer diameter. Specifically, the intelligent control insulation thickness automatic tester and projector are applicable for testing the insulation thickness and outer diameter of wires and cables in accordance with the GB/T2951.11-2008 standard, namely "Common test methods for insulating and sheathing materials of electric and optical cables-Part 11: Methods for general application-Measurement of thickness and overall dimensions-Tests for determining the mechanical properties".
View More →
Electrical Property Test
CM-QJ36 Intelligent Digital Resistance Bridge
QJ36 Intelligent digital resistance bridge is an upgraded version of the traditional intelligent conductor resistance testing machine, which is a comprehensive test system, comprising functions of a DC bridge, an amplifying galvanometer, a constant current source and standard resistors and other accessories. The technical performance of this instrument meets the International Electrotechnical Commission IEC 60468 and Chinese standard GB / T3048.4-2007 conductor DC resistance test standards. Enable online testing at the same time, measurement data are in line with standards to save materials for plants, realize quality control from source and improve work efficiency. Companied with a 1m traditional bridge fixture for measurement, thus complying with the testing standards of product quality, and reducing unnecessary waste as well, the production efficiency is improved.
View More →Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO