CM52161 Halogen Acid Gas Release Determination Device
This equipment is used to measure gas volume of Halogen Acid (IEC 60754-1), pH concentration (PH Meter, Hydrogen ions, IEC 60754-2), Conductivity (IEC 60754-2) and etc from a wire (cable) by radiant heat in the Tube Furnace (IEC 60754-1: 800℃, IEC 60754-2: 950℃)
Category:
Product Introduction
- IEC 60754-1~2-2019
- Activated Carbon (air filtering): filter for filtering the supplied air
- Silica Gel (air drying): a device for drying the supplied air
- Flowmeter: 0.1～1 L/min, a device to control the flow of the air source
- Thermocouple: K type of high temperature resistant stainless thermocouple, range: 0 ～1300℃
- Quartz Tube: Φ40×800
- Magnetic Stirrer: an stirrer used for mixing combustion gas in distilled water
- PH Meter: a device used for measuring the pH acidity (ray magnetic)
- Conductivity Meter: a device for measuring conductivity of combustion gas (ray magnetic)
- 7 "color Touch screen and PLC and PID automatic calculation of the module control heating furnace temperature
- Heating Furnace: Φ220×600. effective heating space: Φ43×550. power: 4 KW
- Washing Bottle: 500 ml straight tube bottle washing, quantity: 3, 2 L measuring cup, quantity: 1
- Dimensions: Main unit 1200 mm(W) x 520 mm(D) x 725 mm(H)
- Placement table 2500 mm(W) × 600 mm(D)
- Power Supply: AC220 V, 50/60 Hz, 21 A
- Reagents, glassware, gas source (provided by the customer)
Keywords:
CM52161 Halogen Acid Gas Release Determination Device
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy