CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
Category:
Product Introduction
- IEC 60811-3-1:1985
- Thickness of Blade Edge: 0.70±0.01mm
- Blade Width: 45mm
- Maximum Diameter of Sample: Φ35mm
- Metal Plate Size: width 40mm × length 120mm
- Number of Metal Plates: flat plate, 90°V slot plate, 120°V slot plate, 3 pcs of each. 9 pcs in total
- This device is suitable for insulation high temperature pressure test, and does not include sample supporting rod for sheath high temperature pressure test
- Weight Tray Specification: outer diameter Φ80mm
- Weight of Single Pallet and Blade Holder: 78g
- Load Worked on the Blade Edge(from the formula): F= k √2Dδ- δ2
- Max Specimen Numbers in One Test: 3
- Weight: 1g, 5g, 10g, 50g, 200g each one of them. 2g, 20g, 100g each two of them. 11pcs/ box, three boxes in total
- Overall Dimensions: 350mm×200mm×277mm
Keywords:
CM42149 Pressure Test Device at High Temperature
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy