CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
Category:
Product Introduction
Main Component Brands
- Main Motor: WNM
- Frequency Converter: Inovance
- Main Drive Bearing of Main Machine: NSK + SKF
Main Technical Parameters
- Take-up Bobbin Size: Φ500 mm×Φ70 mm×Φ32 mm
- Single Wire Diameter: Φ0.1 mm - Φ0.45 mm
- Stranding Outer Diameter: 0.5 mm - 3.0 mm
- Stranding Section Area: 0.3 mm² - 4.0 mm²
- Max Stranding Bow Speed: 2,500 rpm (5,000 twists)
- Main Motor Power: 5.5 kW
- Frequency Converter Power: 5.5 kW
- Magnetic Powder Clutch: 1.2 KGF
- Lay Pitch: 4.22 mm - 55.47 mm (40 kinds of pitch)
- Lay Pitch Adjustment: Traction wheel replacement
- Overall Dimensions (L×W×H): 2680 mm×1250 mm×1500 mm
- Direction of Lay: Z/S, freely selectable for left and right
- Auto Stop Time: 10 S
- Emergency Stop Time: 2 S
- Take-up Reel Lifting: Electric lifting
- Main Power: 380 V AC, 50 Hz
- Tension Control: Touch screen + PLC + magnetic powder clutch control ensures constant tension from empty spool to full spool.
- Protection Method: Automatic brake for internal and external wire breakage; auto-stop when the set length is reached.
- Brake Method: 10 kg electromagnetic brake.
- Traversing Method: Bearing type polished rod traversing, adjustable traverse width and pitch
- Operation Method: All operations controlled by touch screen.
Keywords:
CM-BCM500 Φ500 mm Bunching Machine
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy