CM52160 Fluorine Content Measuring Instrument
The instrument is a perfect combination of advanced electronic technology, sensor technology, and software design, and is the most cost-effective laboratory fluoride concentration analysis instrument. It is widely used for the testing and analysis of fluoride in drinking water, surface water, seawater, domestic sewage, and industrial wastewater, as well as the determination of fluoride in mineral materials, organic materials, and biological materials.This instrument is built-in microprocessor chips, nice appearance, user-friendly with the following outstanding features.
Category:
Product Introduction
- IEC 60684.2-2003
mV | Measuring range | -1999.9mV～0～1999.9mV |
Resolution | 0.1mV | |
Accuracy | ±0.03%FS | |
Fluorideion | Measuring range | Electrometer: (0.00～14.00)pF |
Display Units | pX、mol/L、mg/L,ppm | |
Accuracy | Electrometer:±0.01.Supporting facility:±0.02pF | |
Temperature | (0～60℃(automatic or manual) | |
Temperature | Measurement range | -10℃~110℃ |
Resolution | 0.1℃ | |
Accuracy | 5-60℃ range:±0.4℃ Other ranges:±0.8℃ | |
Other technical parameters | Data storage | 900 groups |
Storage contents | Measurement value number, measurement value, temperature value,ATC or MTC status, measurement date, measurement time | |
Power supply | DC9V/300mA | |
Communication interface | RS232 | |
Dimensions and weight | 160mm×190mm×70mm/880g | |
Quality and safety | ISO9001:2000,CE and CMC | |
Working conditions | Ambient temperature | 5~35℃(0.01 level)15~30℃(0.001 level) |
Ambient humidity | ≤75% | |
IP level | IP54 dust and splash prevention |
Keywords:
CM52160 Fluorine Content Measuring Instrument
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy