CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
Product Introduction
Equipment Configuration
No. | Equipment Name | Specification | Qty | Function |
1 | Vertical Dual-Reel Active Back-Twisting Machine | Φ500 mm | 1 set | Active back-twist feeding for core wires |
2 | Inlet Wire Tension Equalizing Device | / | 1 set | Tension Control before Core Twisting |
3 | Painting | According to customer's requirement | ||
4 | Line direction | To be determined according to the customer's production site | ||
Main Technical Parameters
- Core Wire Diameter: Max. 1.5 mm
- Stranded Wire Outer Diameter: Max. Φ3.0 mm
- Twist Pitch Range: 6–54.7 mm, adjustable via change gears; tolerance ±0.2 mm
- Max Rotational Speed: 0–2500 rpm
- Max Line Speed: 120 m/min
- Pay-off Tension: Feedback control via tension lever; range 0–2 kg, tolerance ±0.1 kg
- Take-up Tension: Spring or magnetic powder control; range 0–5 kg, tolerance ±0.1 kg
- Spool Lifting: Pay-off motor-driven automatic lifting; take-up hydraulic automatic lifting
- Applicable Spool Diameter: Φ500 mm
- Length Measurement Type: Internal meter; deceleration before target length and stop at set length; measurement accuracy within 0.3‰ (note: measured length refers to the final twisted wire length).
Main Component Brands
- Motor: WNM
- Variable Frequency Drive (VFD): Inovance
- Electrical Control Components
- Air Circuit Breaker: Schneider
- AC Contactor: Schneider
- Length Counter / Meter: YOTO, Taiwan
- Selector Switch: Schneider
- Relay: Omron, Japan
- Terminal Blocks: Phoenix
- Air Circuit Breaker: Schneider
Keywords:
CM-BTM500 Φ500mm Vertical Back Twist Machine
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy