Multi-Wire Drawing Machines
Application: Simultaneous drawing of 8-24 copper wires 0.15-0.60mm for higher productivity.
Category:
Product Introduction
Application
Simultaneous drawing of 8-24 copper wires 0.15-0.60mm for higher productivity.
Features
Independent motor control per capstan group, max speed up to 2,100 m/min (depending on wire diameter), up to ±0.001mm accuracy, 30-40% energy saving.
Technical specification
| Machine Type | MWD100.140.16-25 | MWD120.200.16-19 | MWD190.140.24-25 |
| Number of wire | 16 | 16 | 24 |
| Incoming wire dia. (mm) | Φ1.50-Φ1.80 | Φ1.60-Φ2.60 | Φ1.80-Φ2.00 |
| Outgoing wire dia. (mm) | Φ0.12-Φ0.40 | Φ0.20-Φ0.85 | Φ0.15-Φ0.40 |
| Max. cross-section | 1800 | 1800 | 1800 |
| Max. drawing dies | 25 | 19 | 25 |
| Slip ratio of M/C | 20%+15.5%+Outlet quick die change adjustment | 20%+11%+Outlet quick die change adjustment | 20%+15%+Qutlet quick die change adjustment |
| Main machine power (kW) | 180 + 45 | 85 + 200 + 55 | 85 + 250 + 55 |
| Drawing roll dia. (mm) | Φ100 | Φ120/100 | Φ100 |
| Annealing control method | DC | ||
| Contact pulley dia. (mm) | Φ140 | Φ200 | Φ140 |
| Annealing voltage (V) | 60 | ||
| Annealing current (V) | 2000 | 5000 | 3000 |
| Annealing method | DC continuous resistance annealing,two-stage or three-stage,can be selected according to the actual production specifications. | ||
Keywords:
Multi-Wire Drawing Machines
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy