Single/Dual Wires Individual Motor Driven Type RBD
Application: Breakdown drawing of Ø8.0/9.5mm Cu/Al rod to 1.2-4.5mm single or dual wire with annealing.
Category:
Product Introduction
Application
Breakdown drawing of Ø8.0/9.5mm Cu/Al rod to 1.2-4.5mm single or dual wire with annealing.
Features
Individual servo motor per capstan, energy saving up to 30%, ultra-low noise, independent tension control.
Technical specification
| Machine Type | IRBD450.13-2 | IRBD450.11-2 | IRBD450.9-2 | IRBD450.13 | IRBD450.11 | IRBD450.9 |
| Number of wire | 2 | 2 | 2 | 1 | 1 | 1 |
| Max. drawing dies | 13×2 | 11×2 | 9×2 | 13 | 11 | 9 |
| Incoming wire dia. (mm) | Φ8 | Φ8 | Φ8 | Φ8 | Φ8 | Φ8 |
| Outgoing wire dia. (mm) | 2*Φ1.20-Φ3.50 1*Φ1.20-Φ4.50 |
2*Φ1.20-Φ3.50 1*Φ1.20-Φ4.50 |
2*Φ2.0-Φ3.50 1*Φ2.0-Φ4.50 |
Φ1.20-Φ4.50 | Φ1.50-Φ4.50 | Φ2.0-Φ4.50 |
| Bobbin dia. (mm) | Φ450 | |||||
| Slip ratio of M/C | 0.08% - 0.48% | |||||
| Control method | Each drum is independently driven, adjustable speed ratio, controllable slip. | |||||
| Drive method | Variable frequency motor/AC Servo/Direct driver motor | |||||
| Rapid die-change system | According to the diameter setting, automatic adjustment, can arbitrarily close any unnecessary drum, can arbitrarily skip die, empty die. | |||||
| Drawing lubrication | Full immersing. | |||||
| Max. drawing speed (mpm) | 1800 | 1800 | 1200 | 1800 | 1800 | 1200 |
| Suitable take up | Dual spooler/Compact spooler/Drop coiler | |||||
Keywords:
Single/Dual Wires Individual Motor Driven Type RBD
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy