Tubular Stranding Machines
Application: High-speed stranding of Cu/Al/steel wires 1.0-5.0mm for overhead/flexible cables.
Category:
Product Introduction
Application
High-speed stranding of Cu/Al/steel wires 1.0-5.0mm for overhead/flexible cables.
Features
Tubular body with bearing support, max speed up to 1,200 RPM (depending on wire material and diameter), low noise, high rotational stability, easy threading.
Technical specification
| Machine Type | CM-TSM200 | CM-TSM315 | CM-TSM400 | CM-TSM500 | CM-TSM630 | |
| Single wire dia. (mm) | Copper | Φ0.4-Φ1.0 | Φ0.4-Φ1.4 | Φ1.2-Φ4.0 | Φ1.2-4.5 | Φ1.5-Φ5.0 |
| Aluminum | Φ0.4-Φ1.0 | Φ0.8-Φ2.0 | Φ1.50-Φ4.5 | Φ1.50-5.0 | Φ1.8-Φ5.0 | |
| Max. stranded dia. (mm) | Φ7 | Φ14 | Φ32 | Φ35 | Φ35 | |
| Stranding pitch (mm) | 6B | 12-92 | 15-115 | 37-281 | 45-350 | 82-620 |
| 12B | 20-152 | 24-182 | 42-320 | 50-380 | 60-450 | |
| 18B | 30-228 | 33-255 | 44-334 | 60-420 | 82-620 | |
| Traction device (rpm) | 6B | 1400 | 1000 | 800 | 700 | 500 |
| 12B | 1150 | 850 | 620 | 600 | 400 | |
| 18B | 950 | 750 | 550 | 500 | 350 | |
| Capstan | Capstan dia. (mm) | Φ300 | Φ500 | Φ800 | Φ 1000 | Φ 1250 |
| Max. pulling force (T) | 1 | 2 | 2.5 | 3.5 | 4 | |
| Motor power (kW) | 11 | 15 | 18.5 | 22 | 37 | |
| Bobbin dia. (mm) | Φ200 | Φ315 | Φ400 | Φ500 | Φ630 | |
| Center pay-off bobbin dia. (mm) | Φ200 | Φ315 | Φ400 | Φ500 | Φ630 | |
| Take-up bobbin dia. (mm) | Φ630 | Φ800 | Φ1250 | Φ1600 | Φ2000 | |
| Machine Type | CM-TSM-K80 |
| Max. rotating speed (rpm) | 4000 |
| Pay-off wire dia. (mm) | Φ0.016-Φ0.080 |
| Number of pay-off spindles | 7 |
| Motor | 11kW 3-phase asynchronous motor |
| Pay-off reel dia. (mm) | Φ80 |
| Take-up reel dia. (mm) | Φ100 |
| Strand pitch (mm) | 1.0-5.0 |
| Tension control | Swing rod friction type tension control |
| Automatic stop | Full-length stop, wire break stop, fault stop |
| Machine dimensions LxWxH (mm) | 4300x1000x1500 |
| Machine weight (kg) | 1500 |
| Machine Type | CM-CSM1+6B+12B-130 | CM-CSM1+24B-130 |
| Application | Conventional cable stranding | Ultra-fine wire stranding |
| Max. Rotating Speed | 150rpm | |
| Conductor Dia. | AWG50-AWG36 (1/0.025-7/0.05) | |
| Stranding OD | Φ0.3-Φ4.0mm | |
| Pay-off Spindles | 1+6+12B | 1+24B |
| Center Height | 890mm | |
| Pay-off Bobbin | Φ130mm | |
| Take-up Bobbin | Φ130-Φ300mm | |
| Wrap Pitch | 3-60mm | |
| Strand Pitch | 10-500mm | |
| Tension Control | Permanent magnet clutch regulation | |
| Automatic Stop | Metering / Thread breakage detect | |
| Power Supply | 12KW / 380V 50HZ | |
| Dimension / Weight | 9100*2100*2050 / 7000KG | 7100*2100*2050 / 7000KG |
| Equipment Features | 1.PLC control + servo motor/frequency converter/encoder = stable & reliable performance. 2.Complete untwisting, constant tension, stable and durable equipment. |
|
Keywords:
Tubular Stranding Machines
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy