Caterpillar
Application: Powerful pulling of cable in extrusion/armoring/rewinding lines.
Category:
Product Introduction
Application
Powerful pulling of cable in extrusion/armoring/rewinding lines.
Features
Dual belt pneumatic pressure, servo synchronization, non-marking pads, traction force up to 5000kg.
Technical specification
| Machine Type | CM-CP200 | CM-CP300 | CM-CP500 | CM-CP800 | CM-CP1250 | CM-CP1600 | CM-CP2000 | CM-CP2500 | CM-CP3200 | CM-CP4000 |
| Cable dia. (mm) | Φ2-Φ20 | Φ5-Φ25 | Φ5-Φ40 | Φ8-Φ60 | Φ10-Φ80 | Φ15-Φ100 | Φ20-Φ120 | Φ20-Φ130 | Φ25-Φ130 | Φ30-Φ180 |
| Traction (kg) | 200 | 300 | 500 | 800 | 1250 | 1600 | 2000 | 2500 | 3200 | 4000 |
| Speed (mpm) | 150 | 150 | 100 | 100 | 80 | 80 | 60 | 60 | 45 | 40 |
| Belt touch length (mm) | 520 | 620 | 750 | 1200 | 1500 | 1900 | 2100 | 2400 | 2700 | 2900 |
| Belt width (mm) | 70 | 70 | 80 | 100 | 120 | 120 | 135 | 140 | 145 | 165 |
| Cylinder (pair) | 3 | 3 | 3 | 5 | 5 | 6 | 7 | 8 | 9 | 9 |
| Motor power (kW) | 3 | 4 | 5.5 | 7.5 | 7.5 | 11 | 11 | 15 | 15 | 18.5 |
| Motor speed (rpm) | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 |
| Center height (mm) | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 |
|
Outer width L×W×H (mm) |
1450×720×1500 | 1500×720×1500 | 1800×1000×1600 | 2500×1150×1650 | 2750×1150×1650 | 2750×1150×1700 | 3450×1200×1750 | 3800×1200×1750 | 4500×1280×1820 | 4600×1300×1900 |
Keywords:
Caterpillar
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO