CM22047 Wire Rod Elongation Tester
This equipment is used to test the elongation of copper wires, aluminum wires, aluminum magnesium alloy wires, iron wires, and other wires. The circuit is adopted the integrated circuit and process control, which doesn't need manual calculation, and automatically displays the percentage of elongation. The elongation length adopted with the laser sensor technology, with high sensor precision, and the full-scale range error is ±0.3%
Category:
Product Introduction
1.Product Description
Wire rod elongation tester is used to test the elongation of copper wires, aluminum wires, aluminum magnesium alloy wires, iron wires, and other wires. The circuit is adopted the integrated circuit and process control, which doesn't need manual calculation, and automatically displays the percentage of elongation. The elongation length adopted with the laser sensor technology, with high sensor precision, and the full-scale range error is ±0.3%
NCM：9030332000
2.Standard
- UL, CSA, GB, ASTM, VDE, IEC
3.Technical Parameters
- Applicable Wire Diameter: Φ0.08-Φ0.8 mm
- Stretching Speed: 200-300 mm/min
- Specimen Length: 250 mm
- Stretching Range: 0-60%
- Elongation Resolution: 0.1%
4.Specifications
- Overall Dimensions: 550mm×260mm×350mm
- Power Supply: AC220V 50/60Hz 2A
Keywords:
CM22047 Wire Rod Elongation Tester
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy