Repeated Bending Tester
Application: Testing tensile strength, elongation, torsion, and repeated bending of wires & cables.
Category:
Product Introduction
Application
Testing tensile strength, elongation, torsion, and repeated bending of wires & cables.
Features
Digital display, precision load cell, auto stop at break, IEC60811 compliant, high repeatability.
Standards
GB / T4909.5-2009
Technical parameters
| Type | CM-RBT Series |
| Specimen length | 300 mm |
| Applicable wire OD | Φ0.3 mm-Φ10.0 mm |
| Bending speed | 10-60 times/min |
| Times setting | 0-9999 times, adjustable |
| Bending clamp radius | r1.25, r1.75, r2.5, r3.75, r5, r7.5, r10, r15, r20, r25, r30 mm |
| Distance between die hole and upper surface of clamp | Adjustable from 15 mm to 125 mm |
| Control method | 7-inch touch screen |
Keywords:
Repeated Bending Tester
Related Machines
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →
This equipment is used in conjunction with the high-temperature oven, specimens are hung in the device and placed in an oven, and put the weights on the lower grip of specimens, after 10 minutes, measure the distance between the marks and calculate the elongation.
View More →
CM52160 Fluorine Content Measuring Instrument
The instrument is a perfect combination of advanced electronic technology, sensor technology, and software design, and is the most cost-effective laboratory fluoride concentration analysis instrument. It is widely used for the testing and analysis of fluoride in drinking water, surface water, seawater, domestic sewage, and industrial wastewater, as well as the determination of fluoride in mineral materials, organic materials, and biological materials.This instrument is built-in microprocessor chips, nice appearance, user-friendly with the following outstanding features.
View More →
CM52161 Halogen Acid Gas Release Determination Device
This equipment is used to measure gas volume of Halogen Acid (IEC 60754-1), pH concentration (PH Meter, Hydrogen ions, IEC 60754-2), Conductivity (IEC 60754-2) and etc from a wire (cable) by radiant heat in the Tube Furnace (IEC 60754-1: 800℃, IEC 60754-2: 950℃)
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO