Single-Wire Vertical Burning Tester
Application：Vertical flame spread test for bunched cables per IEC60332-3-10/22/23/24/25.
Category:
Product Introduction
Application
Vertical flame spread test for bunched cables per IEC60332-3-10/22/23/24/25.
Features
1000×2000×4000mm stainless chamber, auto ignition & extinguishing, wind speed control, computer recorded.
Technical parameters
| Type | CM-VBT Series |
| Metal enclosure dimensions | 300 mm × 450 mm × 1200 mm; front side open, top and bottom enclosed. |
| Combustion chamber volume | ≥ 1 m³ |
| Burner | Rated power 1 kW |
| Control method | Touch screen control; test flame application time can be set on the screen. During flame temperature calibration, the burning time can be controlled and the temperature value is displayed. |
| Ignition system | Automatic high-voltage ignition. |
| Flow meter | One air rotameter adjustable from 1.5-15 L/min, and one propane rotameter adjustable from 0.1-1 L/min. |
| Exhaust system | One independently controlled exhaust fan installed at the top. |
| Flame Detection System | One imported K-type thermocouple with Φ0.5 mm diameter; one electrolytic copper block with outer diameter Φ9 mm and mass 10 g ± 0.05 g; one set of temperature and time display unit. |
| SUS304 stainless steel control cabinet, fume hood, and metal enclosure integrated into one unit, ensuring convenient operation and a clean, aesthetically pleasing appearance. | |
Keywords:
Single-Wire Vertical Burning Tester
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO