Products
undefined
+
  • undefined

Digital Oxygen Index Tester


Application:Vertical flame spread test for bunched cables per IEC60332-3-10/22/23/24/25.

info@cabmac.com

Product Introduction



Application

Vertical flame spread test for bunched cables per IEC60332-3-10/22/23/24/25. 

 

Features

1000×2000×4000mm stainless chamber, auto ignition & extinguishing, wind speed control, computer recorded. 

 

Technical parameters

Type CM-DOI Series
Combustion tube ID 90mm
Combustion tube height 450mm
Orifice diameter at the tail end of long-rod igniter Φ2 ± 1 mm
Flow meter 160~1600 L/H adjustable
Pressure gauge accuracy level 2.5
Pressure gauge resolution 0.01Mpa
Oxygen concentration indicator resolution 0.1%
Oxygen sensor  Imported high-precision oxygen sensor
Gas supply Oxygen and nitrogen with purity not less than 98%
Test environment Temperature 10-35 °C, relative humidity 45%-75%
Input pressure  0.2-0.3Mpa
Operating pressure 0.05-0.15Mpa
Specimen type Self-supporting materials and non-self-supporting materials

Keywords:

Digital Oxygen Index Tester

Related Machines



CM42149 Pressure Test Device at High Temperature

Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.

View More →

CM42043 Hot Set Test Device

This equipment is used in conjunction with the high-temperature oven, specimens are hung in the device and placed in an oven, and put the weights on the lower grip of specimens, after 10 minutes, measure the distance between the marks and calculate the elongation.

View More →

CM52160 Fluorine Content Measuring Instrument

The instrument is a perfect combination of advanced electronic technology, sensor technology, and software design, and is the most cost-effective laboratory fluoride concentration analysis instrument. It is widely used for the testing and analysis of fluoride in drinking water, surface water, seawater, domestic sewage, and industrial wastewater, as well as the determination of fluoride in mineral materials, organic materials, and biological materials.This instrument is built-in microprocessor chips, nice appearance, user-friendly with the following outstanding features.

View More →

CM52161 Halogen Acid Gas Release Determination Device

This equipment is used to measure gas volume of Halogen Acid (IEC 60754-1), pH concentration (PH Meter, Hydrogen ions, IEC 60754-2), Conductivity (IEC 60754-2) and etc from a wire (cable) by radiant heat in the Tube Furnace (IEC 60754-1: 800℃, IEC 60754-2: 950℃)

View More →

Product Message

*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible



Please upload files in RAR or ZIP format.
Submit Message

I WANT TO LEAVE A MESSAGE

If you have any suggestions or are interested in collaboration, please contact us via the following methods. We will respond as soon as possible. Thank you!