High and Low Temperature Test Chamber
High and low temperature test chamber is used to examine and determine the storage and working performance electronic, electrical, automobile electrical appliances and materials etc, under conditions of high and low temperature environment, which is for schools, factories, war industries, R&D departments and so on.
Category:
Product Introduction
Product description
High and low temperature test chamber is used to examine and determine the storage and working performance electronic, electrical, automobile electrical appliances and materials etc, under conditions of high and low temperature environment, which is for schools, factories, war industries, R&D departments and so on.
Standards
IEC 60068-2-1:1990
Technical parameters
| Type | CM-HLT Series | ||||||
| Chamber structure | The chamber is manufactured by CNC machining with an elegant and well-proportioned design, and is equipped with non-reactive handles for easy operation. The inner chamber is made of imported high-grade stainless steel (SUS304) mirror-finish panels, while the outer chamber is constructed of A3 steel plates with powder coating, enhancing appearance and cleanliness. A large observation window with built-in lighting ensures a bright interior; the embedded tempered glass with integrated heating element allows clear observation of the chamber conditions at all times. A Φ50 mm test port is provided for external connection of test power cables or signal cables. | ||||||
| Control system | Temperature control is realized by a Japan RKC digital temperature controller. The temperature control output power is calculated by microcomputer-based PID control. | ||||||
| Refrigeration system | The refrigeration unit adopts a France-original Tecumseh fully hermetic compressor. Components such as the filter dryer, refrigerant flow sight glass, service valve, oil separator, solenoid valve, and liquid receiver are all imported original parts. | ||||||
| Working chamber size | Customer selection | ||||||
| Temperature range | 0 °C-150 °C, −20 °C-150 °C, −40 °C-150 °C, −60 °C-150 °C, −70 °C-150 °C (optional, selectable by customer) | ||||||
| Temperature fluctuation | ±0.5 °C (no-load condition) | ||||||
| Temperature deviation | ≤ ±2 °C | ||||||
| Average Heating | 0.7-1.0 °C/min (no-load condition) | ||||||
| Time setting range | 0-9999 hours | ||||||
| Working volume | 100L | 150L | 225L | 550L | 800L | 1000L | 1300L |
| Working dimensions W×D×H (mm) |
500×400×500 | 500×500×600 | 600×500×750 | 800×700×900 | 1000×800×1000 | 1000×1000×1000 | 1000×1300×1000 |
| Overall dimensions W×D×H (mm) |
1000×1000×1600 | 1000×1000×1650 | 1100×1050×1750 | 1300×1200×2100 | 1500×1300×2150 | 1500×1500×2150 | 1500×1800×2150 |
| Overalldi mensions | Customized depends on user's requirement. | ||||||
| Power supply | Provided according to model selection of users. | ||||||
Keywords:
High and Low Temperature Test Chamber
Related Machines
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →
This equipment is used in conjunction with the high-temperature oven, specimens are hung in the device and placed in an oven, and put the weights on the lower grip of specimens, after 10 minutes, measure the distance between the marks and calculate the elongation.
View More →
CM52160 Fluorine Content Measuring Instrument
The instrument is a perfect combination of advanced electronic technology, sensor technology, and software design, and is the most cost-effective laboratory fluoride concentration analysis instrument. It is widely used for the testing and analysis of fluoride in drinking water, surface water, seawater, domestic sewage, and industrial wastewater, as well as the determination of fluoride in mineral materials, organic materials, and biological materials.This instrument is built-in microprocessor chips, nice appearance, user-friendly with the following outstanding features.
View More →
CM52161 Halogen Acid Gas Release Determination Device
This equipment is used to measure gas volume of Halogen Acid (IEC 60754-1), pH concentration (PH Meter, Hydrogen ions, IEC 60754-2), Conductivity (IEC 60754-2) and etc from a wire (cable) by radiant heat in the Tube Furnace (IEC 60754-1: 800℃, IEC 60754-2: 950℃)
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO