Ventilated Ageing Test Chamber
Ventilation aging test oven is applicable for wires, leathers, plastics, rubbers, textiles changing properties before and after being heated. For the wires, it is used to maintain the fresh air inside the chamber and a special regulation of ventilation when being heated. With a precision designed ventilation regulating device, a digital wattmeter and timer enable to measure the ventilation rate. Horizontal forced air circulation system and internal airflow adjustment on both sides, make sure the internal temperature ofthe testing machine uniformity and stability.
Category:
Product Introduction
Product description
Ventilation aging test oven is applicable for wires, leathers, plastics, rubbers, textiles changing properties before and after being heated. For the wires, it is used to maintain the fresh air inside the chamber and a special regulation of ventilation when being heated. With a precision designed ventilation regulating device, a digital wattmeter and timer enable to measure the ventilation rate. Horizontal forced air circulation system and internal airflow adjustment on both sides, make sure the internal temperature ofthe testing machine uniformity and stability.
Standards
UL1581
Technical parameters
| Type | CM-VAT Series |
| Temperature range | Ambient to 250 °C |
| Temperature fluctuation | ±0.5 °C |
| Temperature deviation | ±2 °C |
| Heating time | From ambient temperature to 250 °C, approx. 40 minutes. |
| Air exchange adjustment | Knob control; air exchange rate to be calculated. |
| Control method | Push-button control |
| Inner chamber dimensions | 500 mm × 500 mm × 500 mm (customizable) |
| Inner chamber material | SUS304 stainless steel |
| Outer chamber | Anti-static powder coating, with an aesthetically pleasing finish. |
| Thermal insulation material | 80 mm thick high-density glass fiber insulation. |
| Heater | Tubular (sheathed) heater set, 380 V / 6 kW |
| Auxiliary equipment | Over-temperature protection, various status indicator lights, one set of rotary tray and rotary motor(Detachable rotary tray; rotation speed 8-10 rpm). |
| Air exchange measurement power meter with an adjustment knob for regulating the air exchange rate; the air exchange rate is adjustable from 8 to 200 times per hour, measured at 80 °C. | |
| Timer | Used for aging timing and air exchange measurement timing. |
| Air circulation system | Multi-blade centrifugal circulation fan. |
| Electrical control system | Microcomputer-based electronic temperature controller with LCD display; PID + SCR control to enhance control component interface service life and stability.Equipped with high-precision PT100 platinum temperature sensor. |
Keywords:
Ventilated Ageing Test Chamber
Related Machines
Single/Dual Wires Individual Motor Driven Type RBD
Application: Breakdown drawing of Ø8.0/9.5mm Cu/Al rod to 1.2-4.5mm single or dual wire with annealing.
View More →
Single Motor/Gear Driven Type RBD
Application: Breakdown drawing of Ø8.0/9.5mm Cu/Al rod to 1.2-4.5mm wire with continuous annealing (optional).
View More →
Intermediate/Fine Wire Drawing Machines
Application: Drawing annealed Cu wire 0.4-2.6mm to 0.08-1.2mm with continuous annealing.
View More →
Application: Simultaneous drawing of 8-24 copper wires 0.15-0.60mm for higher productivity.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO