Take-Up and Pay-Off Units
Application:Active/passive pay-off and take-up in extrusion, stranding, rewinding lines.
Category:
Product Introduction
Application
Active/passive pay-off and take-up in extrusion, stranding, rewinding lines.
Features
Column type / portal (gantry) type, 630-5,000mm reel, servo tension control, auto loading optional.
Portal type pay off and take up
Application
Winding and reeling all kinds of cable into a bobbin.
Technical specification
| Machine Type | PO/TU630-1250 | PO/TU800-1600 | PO/TU1000-2000 | PO/TU1250-2500 | PO/TU1600-3150 | PO/TU1600-3500 |
| Max. wire dia. (mm) | Φ35 | Φ50 | Φ70 | Φ100 | Φ120 | Φ130 |
| Reel flange dia. (mm) | Φ630-Φ1250 | Φ800-Φ1600 | Φ1000-Φ2000 | Φ1250-Φ2500 | Φ1600-Φ3150 | Φ1600-Φ3500 |
| Reel outer width (mm) | 475-950 | 600-1180 | 750-1500 | 950-1900 | 1180-2300 | 1180-2300 |
| Max.load capacity (T) | 3 | 4-8 | 6-10 | 12-15 | 15-20 | 18-20 |
| Max.line speed (mpm) | 100 | 80 | 80 | 65 | 60 | 50 |
| Traverse precision (%) | 1-2 | 1-2 | 1-2 | 1-2 | 1-2 | 1-2 |
Column type pay off and take up
Application
Suitable for winding and reeling wire and cable
Technical specification
| Machine Type | PO/TU800-1250 | PO/TU800-1600 | PO/TU1250-2000 | PO/TU1600-2500 |
| Max. wire dia. (mm) | Φ25 | Φ35 | Φ50 | Φ60 |
| Reel flange dia. (mm) | Φ800-Φ1250 | Φ800-Φ1600 | Φ1250-Φ2000 | Φ1600-Φ2500 |
| Reel outer width (mm) | 600-950 | 600-1180 | 950-1500 | 1180-2300 |
| Max. load capacity (T) | 4 | 5 | 10 | 12 |
| Take up speed (rpm) | 18.8-47.6 | 18.8-47.6 | 6-15.5 | 6-15.5 |
| Take up motor | JLJ132-40/4 | JLJ132-40/4 | JLJ160-60/6 | JLJ160-60/6 |
| Lift motor (kW) | 1.1 | 1.1 | 1.5 | 1.5 |
| Moving motor (kW) | 0.75 | 0.75 | 1.1 | 1.1 |
| Traverse pitch (mm) | 5-40 | 5-40 | 10-80 | 10-100 |
Keywords:
Take-Up and Pay-Off Units
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO