Intermediate/Fine Wire Drawing Machines
Application: Drawing annealed Cu wire 0.4-2.6mm to 0.08-1.2mm with continuous annealing.
Category:
Product Introduction
Application
Drawing annealed Cu wire 0.4-2.6mm to 0.08-1.2mm with continuous annealing.
Features
17-28 dies, dual spooler or basket down coiler, DC/skin-pass annealing, high precision up to ±0.001mm.
Technical specification
| Machine Type | FWD-22 | FWD-24 | FWD-14 | FWD-20 |
| Driver | Analog-type motor drive (push-button control) | |||
| Incoming wire dia. (mm) | Φ0.60-Φ1.20 | Φ0.50-Φ1.00 | Φ0.80-Φ1.60 | Φ0.80-Φ1.60 |
| Outgoing wire dia. (mm) | Φ0.10-Φ0.32 | Φ0.10-Φ0.25 | Φ0.30-Φ0.80 | Φ0.15-Φ0.70 |
| Max. drawing speed (mpm) | 2000 | 2000 | 1200 | 1800 |
| Max. drawing dies | 22 | 24 | 14 | 20 |
| Slip ratio of M/C | 15% + 8% | 13% + 8% | 15% + 8% | 15% + 8% |
| Frame | Welded by steel plate. | |||
| Capstan | Ceramic coated. | |||
| Bobbin dia. (mm) | Φ300 (As per customer requirements) | |||
| Bobbin loading & unloading | Shaft type. | |||
| Max. receiving copper (kg) | 50 | |||
| Annealing method | DC three-section annealing | |||
| Main motor (kW) | 11 | 11 | 15 | 15 |
| Spooler motor (kW) | 3.7 | 3.7 | 5.5 | 5.5 |
| Max. annealing current (A) | DC 250 | DC 250 | DC 600 | DC 600 |
| Max. annealing voltage (V) | DC 55 | DC 55 | DC 60 | DC 60 |
| Annealing power (kVA) | 13 | 13 | 36 | 36 |
| Quantity of steam (kg/h) | 8 | 10 | ||
| Water quantity of anneal cool (l/min) | 150 | 250 | ||
| Machine dimension L×W×H (mm) | 2100×1600×1700 | 2100×1600×1700 | 2100×1600×1900 | 3200×1688×2015 |
| Machine weight (kg) | 3000 | 3000 | 3200 | 4000 |
Keywords:
Intermediate/Fine Wire Drawing Machines
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy