Teflon Physics Foaming Extrusion Lines
Application: Physical foaming core + skin for high-frequency coaxial/RF cables (foaming >70%).
Category:
Product Introduction
Application
Physical foaming core + skin for high-frequency coaxial/RF cables (foaming >70%).
Features
Japanese RKC temp control, Mitsubishi servo, nickel-chrome screw, foaming degree >70%, stable capacitance.
Technical specification
| Machine Type | TPF-EL20 |
| Outgoing dia. (mm) | Φ0.10-Φ0.36 |
| Conductor range (mm) | 7*Φ0.016-7*Φ0.04 |
| Foaming agent | N2 /CO2 |
| OD tolerance (mm) | ±0.005 |
| Screw dia. (mm) | Φ20 |
| Accumulate form and length (m) | 70 |
| Max. wire speed (mpm) | 70 |
| Max. haulage speed (mph) | 100 |
| Foaminess | 45%-65% |
| Cooling system | U-type 304 tink |
| Main extruder power | 2000w servo motor |
| Total weigh of the enire production line (T) | 3.5 |
| Total power of the entire production line (kW) | 10 |
| Total size of the entire production line L×W×H (m) | 10×1.2×3.2 |
| Machine Type | TUF-EL12 | TUF-EL15 | TUF-EL18 | TUF-EL12 | TUF-EL25 |
| Adaptive dia. (mm) | Φ0.02-Φ0.03 | Φ0.08-Φ0.30 | Φ0.10-Φ0.50 | Φ0.10-Φ0.60 | Φ0.15-Φ1.00 |
| Finish line dia. (mm) | Φ0.04-Φ0.40 | Φ0.12-Φ0.50 | Φ0.15-Φ0.70 | Φ0.20-Φ0.90 | Φ0.30-Φ1.30 |
| OD tolerance (mm) | ±0.003 | ±0.03 | ±0.03 | ±0.03 | ±0.04 |
| Screw dia. (mm) | Φ12 | Φ15 | Φ18 | Φ20 | Φ25 |
| Screw L/D ratio | 25:1 | 25:1 | 25:1 | 25:1 | 25:1 |
| Extrusion output (kg/h) | 2 | 3 | 4 | 5 | 7 |
| Mainfram power (kW) | 0.4 | 2.0 | 2.0 | 3.0 | 3.0 |
| Total power (kW) | 8.0 | 8.0 | 9.0 | 9.0 | 10.0 |
| Accumulate form and length (m) | 60 | 60-90 | 60-90 | 70-90 | 70-100 |
| Total weight (T) | 3.5 | 3.5 | 4.0 | 4.0 | 4.5 |
| Total size L×W×H (m) | 10×1.2×3.2 | 10×1.2×3.2 | 10×1.2×3.2 | 10×1.2×3.2 | 10×1.3×3.2 |
Keywords:
Teflon Physics Foaming Extrusion Lines
Related Machines
CM-FT1600 Φ1600mm Foundationless Traversing and Take-up Machine
Used for automatic cable take-up and orderly traversing on PN800–PN1600 reels with a loading capacity of ≤5T. It features electric lifting and lateral movement, foundation-free installation, and a maximum line speed of 110m/min, suitable for take-up applications in cable production lines
View More →
CM-BTM500 Φ500mm Vertical Back Twist Machine
Pre-twisting of insulated cores for Cat5e, Cat6 and higher category data cables.
View More →
CM-BCM500 Φ500 mm Bunching Machine
Applicable for stranding conductors or cores with seven or more wires, including tinned copper, bare copper, copper-clad aluminum (CCA), and copper-clad steel (CCS).
View More →
CM42149 Pressure Test Device at High Temperature
Pressure test device at high temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
View More →Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
Email: info@cabmac.com
Tel: +86-519-88179989
Mobile: +86 13337881658
+86 18796986146
Address: 902-5, No.16 Longcang Road Tianning District, Changzhou, Jiangsu, 21300, China
Powered by: www.300.cn 丨 SEO 丨Privacy Policy